Parking lot epoxy resin floor
Epoxy resin is a synthetic chemical material, which is mainly divided into bisphenol A and bisphenol F. Its molecular structure determines that the epoxy floor has strong chemical stability, not easy to wear, pressure resistance, impact resistance and other characteristics. At the same time, it also has the advantages of rich color. Epoxy resin floor is a hard and compact integrated floor system formed by curing reaction of epoxy resin (mortar). Solvent-free epoxy flooring, solventless molecule escape during curing process, after curing, the intermolecular bonding is tight and porous, and its intermolecular force has hydrogen bond and van der Waals force, so it is stronger and stronger than concrete, so it has excellent compressive resistance.
Epoxy resin floor paint can be divided into three categories: flat-coated epoxy resin floor (also known as thin-coated epoxy resin or thick-film epoxy resin, the thickness is generally 0.3-0.5mm), epoxy resin mortar floor (that is, epoxy mortar floor, the thickness is generally 0.8-3mm), epoxy resin self-leveling floor, epoxy resin self-leveling floor finish. No organic solvents, is completely environmentally friendly floor, and because of its 100% epoxy resin content, so whether it is wear resistance, impact resistance or aesthetics in the commonly used epoxy resin floor are the best. Therefore, the wide application of epoxy floor can be seen in some parking lots. How to use epoxy floor in the parking lot?
The parking area is flat ground. Flat-coated epoxy floor can be used. If the parking area is not smooth, epoxy mortar floor or epoxy self-leveling floor can be used. The color can be designed to be grey or green.
In frequent traffic corridors, relative to parking areas, the design should be strengthened. Epoxy mortar floor or epoxy resin self-leveling floor can be used. The color is usually green or grey. The width of traffic corridor is set according to the site conditions. Usually, the two-way traffic lane should not be less than 6 meters, the one-way traffic lane should not be less than 3 meters, and pedestrians should not be allowed to walk. The channel is 1.5-2 meters, with yellow markings on both sides of the channel, and the width is 8-12mm.
Yellow or white marking paint can also be used in the lane of traffic signs. Arrows are drawn to indicate the direction of traffic and point to parking areas.
Parking spaces are drawn with yellow or white markings. Cars can usually be designed to be 2.5-3.0 meters X5-6 meters with a marking width of 8-12 mm.
In order to avoid backing up and touching the post, yellow and white twill zebra lines can be used to mark the lower end of the post below 1.0-1.2 meters.
Epoxy floor paint is fully used in the above parking lot. It can be used on the ground, parking area or pillars. The anti-corrosion, wear resistance, anti-skid and rich color of epoxy floor paint are fully utilized in the parking lot.
